ciscoルータtmp

PS C:\Users\hitto> ssh cisco@10.10.10.1

-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want
to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------
Password:

% Password expiration warning.
-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you
want to use.

-----------------------------------------------------------------------

yourname#con
yourname#conf
yourname#configure
yourname#configure termi
yourname#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
yourname(config)#wirelesssecu
yourname(config)#wirelesssecu
yourname(config)#wireless secu
yourname(config)#wireless secu
yourname(config)#wireless secu?
% Unrecognized command
yourname(config)#wireless secucu
yourname(config)#wireless security
yourname(config)#wireless security
yourname(config)#wireless security
yourname(config)#wireless security
yourname(config)#wireless security st
yourname(config)#wireless security st
yourname(config)#wireless security
                  ^
% Invalid input detected at '^' marker.

yourname(config)#wireless security strong-password
                  ^
% Invalid input detected at '^' marker.

yourname(config)#usern
yourname(config)#username hitto passwo
yourname(config)#username hitto password hitto
yourname(config)#username hitto password hitto
yourname(config)#^Z
yourname#hostname R1
          ^
% Invalid input detected at '^' marker.

yourname#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
yourname(config)#hostn
yourname(config)#hostname R1
R1(config)#m